how dou you deflate ari FUNWATER SUP board?

OPERATION OF VALVES:

In order to inflate easily,Remove the valve cover(b)clockwise whirl it(b), Put it(a)in “Output” position. After inflating,screw in valve cover(b) and anticlockwise whirl it(b).


WARNING:

Please only use the pump provided or other recommended pumps. DO NOT use an air compressor as you will risk over-inflating the board and severely damaging your SUP beyond repair. Your warranty will be void in the event of damage via over-inflation.

  • Unpack and unroll your SUP on a smooth, clean, flat surface.
  • Connect the air tap on your pump to the inflation valve on your SUP. Firmly push the air tap inwards and twist clockwise to secure the connection.
  • Before you begin to pump, please consult the recommended PSI on the valve(s)  of your SUP and inflate to the appropriate value. DO NOT over-inflate your SUP. 
  • The PSI may not register on your pump until you reach at least 7 PSI - keep pumping! 
  • Once the desired air pressure has been reached, please safely disconnect the air tap of your pump and secure the valve on your SUP.